| SPECIFICATION
OF PILLAR DRILLING MACHINE |
QDM - 1
|
QDM - 2 |
QDM - 3 |
| Drilling cap. ( In steel ) |
25 mm |
19 mm |
13 mm |
| Coloumn diameter |
87 mm |
75 mm |
47mm |
| Spindle center to back distance |
250 mm |
200 mm |
153 mm |
| Spindle nose to table distance |
830 mm |
405 mm |
355 mm |
| Spindle nose to base distance |
1050 mm |
635 mm |
485 mm |
| Table travel |
360 mm |
250 mm |
190 mm |
| Taper in spindle |
M.T. -3 |
M.T. -2 |
socket type M.T. -1 |
| Number of speed |
8 |
8 |
8 |
| Range of speed |
73 to 1800 RPM |
86 to 3360 RPM |
500 to 2825 RPM |
| Table size |
390 mm |
270 * 270 mm |
210 * 210 mm |
| Base size ( machine area ) |
360 * 330 mm |
280 * 240 mm |
190 * 190 mm |
| Overall base size |
610 * 410 mm |
470 * 305 mm |
370 * 240 mm |
| Spindle travel |
252 mm |
127 mm |
76 mm |
| Column length |
1420 mm |
900 mm |
600 mm |
| Overall height with pulley grard |
1840 mm |
1100 mm |
788 mm |
| V-belt section |
B - 52 |
B - 42 |
FHP - 2334 |
| Motor 1440 RPM 3 phase 440 volts |
1 HP |
1 HP |
0.50 HP |
