CNC THREAD MILLING MACHINE

 

zoom in


The CNC TMC - 3000 is used for screw cutting which are used in following machineries

  1. Regid PVC pipe plant machine screw. (Twin co -rotating and counter rotating)
  2. P.P. & L.L.D.P.E. blown film plant machine screw.
  3. H.D.P.E. pipe plant machine screw.
  4. Injection moulding machine screw & for other polymers screws.

FEATURES OF NEW CNC TMC - 3000

  1. Multistar facility
  2. 10 mm to 1000 mm various pitch
  3. 3 H.P. AC VFD on milling head to vary to 100 to 1000 r.p.m. spindle.
  4. Auto tapper turining
  5. User friendly 
  6. Easy to operate
  7. Bedways and spindle are hardened and Ground

SPECIFICATION OF THREAD MILLING MACHINE

CAPACITIES
Type of bed Flat bed ways
Height of center 300 mm
Swing over cross slide 375 mm
Bed width 450 mm
Distance between center 3000 mm
Optional 1000 to 5000 mm

SPINDLE - HEAD STOCK (Y)AXIS
Hole through spindle 80 mm
Optional 50 mm to 150 mm
Spindle taper Morse taper
Spindle speed range 0 to 50 r.p.m.
Spindle sleeve MT 4
Spindle steps (indexing) 10000

MILLING HEAD (X)AXIS
Milling head motor 3 H.P. (A.C. Variable frequency  drive)
Milling head r.p.m. Variable 100 to 1000 r.p.m.
Milling head cutter capacity 15 mm to 40 mm
Milling head nose ISO 40

TAIL STOCK
Tail stock spindle diameter 75 mm
Tail stock spindle travel 250 mm
Tail stock sleeve Straight

CONTROL SYSTEM
Sinumerik 802  S (SIEMENS) 3 axis

THREADS
Infinite range  10 mm pitch to 1000 mm pitch

RAPID
Cross Slide (X axis ) 6 mtr. / min.
Longitudinal (Saddle ) Travel (Z axis ) 6 mtr. / min.
Rotational ( Y axis ) 40 r.p.m.

POSITIONING ACCURACIES
X 0.1 mm
Z 0.1 mm

REPEATABILITY
X 0.001 mm
Y 0.018 mm
Z 0.001 mm

ELECTRICALS
X - axis motor 15 Nm
Y - axis motor 15 Nm
Z -  axis motor 15 Nm
Coolant motor 0.1 Kw
Milling head motor 2.2 Kw

GENER
Floor space L * W * H ( approx ) 4925 mm * 1270 mm * 1650 mm
Machine weight (approx ) 3950 kg.


STANDARD EQUIPMENTS

  1. CNC controller  1 set
  2. 4 jaw true chuck ( 300 mm )  1 nos.
  3. Steady rest ( min. 25 mm to max. 125 mm )
  4. Front cover
  5. Rear cover
  6. Electrical Equipment
  7. Coolent system
  8. Spindle sleeve
  9. Cutter head motor
  10. Cutter head cover
  11. Drag chain
  12. Chuck plate
  13. Tool kit
  14. Manuals

SPECIAL ACCESSORIES

  1. Single tool threading device ( max. 50  r.p.m. )
  2. Power chuck
  3. Tail stock quill
  4. Steady rest( min. 50 mm to max. 200 mm)
  5. Spares

CNC Thread Milling Machine | CNC Turning Centers | CNC Machining Centers | Extra Heavy Duty Lathe Machine | Roll Turning Lathe Machine | Light & Heavy Duty Lathe Machine | Thread Milling Machine (Pneumatic) | Radial Drills | Pillar Drills | Power Press | Shearing Machine| Plate Bending Machine | Universal Milling Machine | Slotting Machine | Surface Grinder Machine | Shaping Machine | Special Purpose Machine